Includes a 2.3m piece of profile edge and a 2.3 piece of backwall edge.
 
The Full Bullnose Z Counterform is ideal for cast-in-place concrete worktops where a clean edge profile is desired. 
 
To use, place 12mm cement board Hardie Backer on top of the cabinets. The cement board should be cut flush to the edge of the cabinets and held in place with silicon caulking. The forms will then be siliconed and screwed into the cement board with 13mm screws. After the concrete is poured, the forms are snapped off along the designated "break point" to reveal a beautiful clean edge.
 
For more detailed instructions and advanced techniques, please watch the Full Instructional Video in the Gallery and Videos Section.