Coverage
1.42 litres covers 13.4m².
Mixing
Ratio: 2A : 1B
Dilute with 25%–50% water
25% = minimum dilution
50% = maximum dilution
Application
Use a nap roller (not foam).
Apply sealer wet and cover the entire surface thoroughly.
Dip the roller and immediately go back over the surface while it’s still saturated.
This is effectively two coats applied back-to-back and should take only a couple of minutes.
Damp excess sealer out of the roller and back roll lightly.
Don’t over-roll—just flatten the sealer and remove bubbles or puddles.
The sealer will self-level and flatten as it dries. Lines will disappear as it shrinks.
After 15 minutes, repeat the process for the next application.
Number of Applications
2 applications: light-traffic projects
3 applications: standard use (most countertops)
4 applications: optional, but test on a sample piece first